0 of 20 questions completed
Click on Start Quiz button to take the Online test.Below materials will help you crack IES Exams with Ease.
You can install IES Android Mobile App for unlimited Online tests with answers and explanation.
Free Materials Download
You can download IES Exam Papers for free.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
0 of 20 questions answered correctly
Time has elapsed
You have reached 0 of 0 points, (0)
- Not categorized 0%
|Table is loading|
|No data available|
- Question 1 of 20
A column member of length I which cannot sway has a rigid foundation at its bottom. Its top is held with heavy beams. The effective length of the column isCorrectIncorrect
- Question 2 of 20
Through which of the following responses may a steel tubular hinged strut fail?
- Question 3 of 20
An ISMB 500 is used as a beam in a multistorey construction. From the viewpoint of structural design,it can be considered to be laterally restrained whenCorrectIncorrect
- Question 4 of 20
A steel column pinned at both ends has a buckling load of 200 M. If the column is restrained against lateral movement at its mid-height,its buckling load will beCorrectIncorrect
- Question 5 of 20
Consider the following provisions to possibly improve the shear capacity of a steel girder :
4.Bearing stiffeners Which of these are correct?CorrectIncorrect
- Question 6 of 20
In a steel plate girder, the web plate is connected to the flange plates by fillet welding. The size of fillet welds is designed to safely resistCorrectIncorrect
- Question 7 of 20
Deflection limitations over beams are imposed because excessive deflection may causeCorrectIncorrect
- Question 8 of 20
In laced columns, end tie-plates are provided toCorrectIncorrect
- Question 9 of 20
Planks sawn from trees with twisted fibers are stronger than those cut from trees with normal growth.
Timber from trees with twisted fibers is used straightaway as poles.CorrectIncorrect
- Question 10 of 20
Attention must be extended to the results of the phenomenon of bulking of sand towards ascertaining the water demand in mortar preparation.
The total volume of mortar prepared per batch of mix preparation for use-in-work should be mindful of the initial settling time.CorrectIncorrect
- Question 11 of 20
The sludge processing utilizes the aerobic digestion in which it is converted to CO2 and methane.
The acid-forming bacteria convert the complex organics such as fats,proteins and carbohydrates into organic fatty acids. The methane-forming bacteria convert organic acids to CO2 and CH4.CorrectIncorrect
- Question 12 of 20
Timber suitable for tension members is obtained from coniferous trees.
Coniferous trees have distinct annular rings and straight grains.CorrectIncorrect
- Question 13 of 20
Closely-graded materials are better than well-graded materials in so far as designs of concrete mixes are concerned.
Interparticle spaces must be well-packed densely for resulting in a good mix.CorrectIncorrect
- Question 14 of 20
Finer grinding of cement results in early development of strength.
Rate of hydration of cement is increased when it is ground finer.CorrectIncorrect
- Question 15 of 20
When plastering on building exteriors, more of coarser particles of sand are used in regions where seasonal rainfall is often intense
and the total annual rainfall also is relatively more.
Such type of ‘dhabbah’ plastering effects the minimization of rainfall impacts resulting in less formation of mosses and less surface dis colouration but may not reduce seepage to the interior.CorrectIncorrect
- Question 16 of 20
Rainwater is collected and harvested using storage structures like underground tanks for future use and also for recharging the aquifer.
Rainwater harvesting pits allow the rainwater to percolate and recharge the aquifer.CorrectIncorrect
- Question 17 of 20
Method of substitution is validly employed in the analysis of member forces in certain geometries of truss structures.
It is always easier to analyze determinate truss forms by geometrical diagramming irrespective of conditions at the support points.CorrectIncorrect
- Question 18 of 20
A rectangular tank 10 m x 5 m in plan and 3 in deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 in, and the other a lighter liquid of specific gravity 0.75 to a depth of 2 m. The resultant pressure thrust on the partition wall isCorrectIncorrect
- Question 19 of 20
The thickness of the laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge ofCorrectIncorrect
- Question 20 of 20
Consider the following assumptions made in the analysis of a jet impinging normally on a moving plate to introduce the principle of moment of momentum
1.Friction between jet and plate is neglected.
2.Flow is steady.
3.Impinging momentum of jet is unchanged.
4.Plate moves at a, constant velocity.
Which of these statements are relevant ?CorrectIncorrect
Leaderboard: IES Civil 5
|Table is loading|
|No data available|